انجمن‌های فارسی اوبونتو

لطفاً به انجمن‌ها وارد شده و یا جهت ورود ثبت‌نام نمائید

لطفاً جهت ورود نام کاربری و رمز عبورتان را وارد نمائید

نویسنده موضوع: مشکل مربوط به dependency هنگام نصب gns3-gui از ppa  (دفعات بازدید: 34 بار)

0 کاربر و 1 مهمان درحال مشاهده موضوع.

آفلاین احسان فعالپور

  • Sr. Member
  • *
  • ارسال: 408
  • جنسیت : پسر
دوستان سلام.
من لازم دارم gns3-gui و gns3-iou رو از ppa رسمی خودش نصب کنم.
ولی دايما مشکلات مربوط به وابستگی‌هاش سر راهم سبز میشه.
➜  ~ sudo apt install gns3-gui       
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 gns3-gui : Depends: python3-pyqt5.qtwebsockets but it is not going to be installed
E: Unable to correct problems, you have held broken packages.


➜  ~ sudo apt install python3-pyqt5.qtwebsockets
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 python3-pyqt5.qtwebsockets : Depends: python3-pyqt5 (= 5.9.2+dfsg-1build2) but 5.10.1+dfsg-1ubuntu2 is to be installed
                              Depends: libqt5websockets5 (>= 5.9.0) but it is not going to be installed
E: Unable to correct problems, you have held broken packages.

اومدم با pip3 هم تست کنم، دو تا نکته وجود داشت یکی اینکه توی pip3 نتوستم gns3-iou رو پیدا کنم و دوم اینکه gns3-gui  ای که بود ورژنش بالاتر از ورژن ppa بود.
پس خواسیم ورژنش رو هم به pip3  بگم که اونم به اینجا رسید.

➜  ~ apt show gns3-gui                               
Package: gns3-gui
Version: 2.1.7~bionic1
Priority: extra
Section: net
Maintainer: GNS3 team <developers@gns3.net>
Installed-Size: 29.6 MB
Pre-Depends: dpkg (>= 1.16.1), python3.4 | python3.5 | python3.6
Depends: python3, python3-pyqt5, python3-pyqt5.qtsvg, python3-pyqt5.qtwebsockets, gns3-server, wireshark, vinagre, libc6 (>= 2.25), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0)
Replaces: gns3 (<< 1.4.0-1)
Download-Size: 8,999 kB
APT-Sources: http://ppa.launchpad.net/gns3/ppa/ubuntu bionic/main amd64 Packages
Description: GNS3 GUI

➜  ~ pip3 search gns3           
gns3-gui (2.1.8)            - GNS3 graphical interface for the GNS3 server.
gns3-server (2.1.8)         - GNS3 server
gns3-netifaces (0.10.4.1)   - Portable network interface information. GNS3 fork for solving a Python 3 issue
gns3-net-converter (1.3.0)  - Official fork by GNS3 team of the gns3 converter.Convert old ini-style GNS3 topologies (<=0.8.7) to the newer version
                              1+ JSON format
gns3-converter (1.2.4)      - Convert old ini-style GNS3 topologies (<=0.8.7) to the newer version 1+ JSON format

➜  ~ pip3 install gns3-gui==2.1.7
Collecting gns3-gui==2.1.7
Collecting psutil>=2.2.1 (from gns3-gui==2.1.7)
  Using cached https://files.pythonhosted.org/packages/51/9e/0f8f5423ce28c9109807024f7bdde776ed0b1161de20b408875de7e030c3/psutil-5.4.6.tar.gz
Collecting raven>=5.23.0 (from gns3-gui==2.1.7)
  Using cached https://files.pythonhosted.org/packages/11/3a/b3e46b279b8bdd9eb55857d0e95044cad31732c80f628bb75e1e9e881a32/raven-6.9.0-py2.py3-none-any.whl
Collecting jsonschema>=2.4.0 (from gns3-gui==2.1.7)
  Using cached https://files.pythonhosted.org/packages/77/de/47e35a97b2b05c2fadbec67d44cfcdcd09b8086951b331d82de90d2912da/jsonschema-2.6.0-py2.py3-none-any.whl
Building wheels for collected packages: psutil
  Running setup.py bdist_wheel for psutil ... error
  Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-l2yfnncb/psutil/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" bdist_wheel -d /tmp/tmpzwxkg_avpip-wheel- --python-tag cp36:
  running bdist_wheel
  running build
  running build_py
  creating build
  creating build/lib.linux-x86_64-3.6
  creating build/lib.linux-x86_64-3.6/psutil
  copying psutil/_psaix.py -> build/lib.linux-x86_64-3.6/psutil
  copying psutil/_psbsd.py -> build/lib.linux-x86_64-3.6/psutil
  copying psutil/_pslinux.py -> build/lib.linux-x86_64-3.6/psutil
  copying psutil/_pssunos.py -> build/lib.linux-x86_64-3.6/psutil
  copying psutil/_pswindows.py -> build/lib.linux-x86_64-3.6/psutil
  copying psutil/_exceptions.py -> build/lib.linux-x86_64-3.6/psutil
  copying psutil/__init__.py -> build/lib.linux-x86_64-3.6/psutil
  copying psutil/_psposix.py -> build/lib.linux-x86_64-3.6/psutil
  copying psutil/_common.py -> build/lib.linux-x86_64-3.6/psutil
  copying psutil/_psosx.py -> build/lib.linux-x86_64-3.6/psutil
  copying psutil/_compat.py -> build/lib.linux-x86_64-3.6/psutil
  creating build/lib.linux-x86_64-3.6/psutil/tests
  copying psutil/tests/test_system.py -> build/lib.linux-x86_64-3.6/psutil/tests
  copying psutil/tests/test_bsd.py -> build/lib.linux-x86_64-3.6/psutil/tests
  copying psutil/tests/test_connections.py -> build/lib.linux-x86_64-3.6/psutil/tests
  copying psutil/tests/test_memory_leaks.py -> build/lib.linux-x86_64-3.6/psutil/tests
  copying psutil/tests/__main__.py -> build/lib.linux-x86_64-3.6/psutil/tests
  copying psutil/tests/test_windows.py -> build/lib.linux-x86_64-3.6/psutil/tests
  copying psutil/tests/test_osx.py -> build/lib.linux-x86_64-3.6/psutil/tests
  copying psutil/tests/test_contracts.py -> build/lib.linux-x86_64-3.6/psutil/tests
  copying psutil/tests/test_linux.py -> build/lib.linux-x86_64-3.6/psutil/tests
  copying psutil/tests/test_misc.py -> build/lib.linux-x86_64-3.6/psutil/tests
  copying psutil/tests/test_sunos.py -> build/lib.linux-x86_64-3.6/psutil/tests
  copying psutil/tests/__init__.py -> build/lib.linux-x86_64-3.6/psutil/tests
  copying psutil/tests/test_posix.py -> build/lib.linux-x86_64-3.6/psutil/tests
  copying psutil/tests/test_unicode.py -> build/lib.linux-x86_64-3.6/psutil/tests
  copying psutil/tests/test_aix.py -> build/lib.linux-x86_64-3.6/psutil/tests
  copying psutil/tests/test_process.py -> build/lib.linux-x86_64-3.6/psutil/tests
  running build_ext
  building 'psutil._psutil_linux' extension
  creating build/temp.linux-x86_64-3.6
  creating build/temp.linux-x86_64-3.6/psutil
  x86_64-linux-gnu-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fdebug-prefix-map=/build/python3.6-EKG1lX/python3.6-3.6.5=. -specs=/usr/share/dpkg/no-pie-compile.specs -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -DPSUTIL_POSIX=1 -DPSUTIL_VERSION=546 -DPSUTIL_LINUX=1 -I/usr/include/python3.6m -c psutil/_psutil_common.c -o build/temp.linux-x86_64-3.6/psutil/_psutil_common.o
  psutil/_psutil_common.c:9:10: fatal error: Python.h: No such file or directory
   #include <Python.h>
            ^~~~~~~~~~
  compilation terminated.
  error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
 
  ----------------------------------------
  Failed building wheel for psutil
  Running setup.py clean for psutil
Failed to build psutil
Installing collected packages: psutil, raven, jsonschema, gns3-gui
  Running setup.py install for psutil ... error
    Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-l2yfnncb/psutil/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-kstst21x-record/install-record.txt --single-version-externally-managed --compile --user --prefix=:
    running install
    running build
    running build_py
    creating build
    creating build/lib.linux-x86_64-3.6
    creating build/lib.linux-x86_64-3.6/psutil
    copying psutil/_psaix.py -> build/lib.linux-x86_64-3.6/psutil
    copying psutil/_psbsd.py -> build/lib.linux-x86_64-3.6/psutil
    copying psutil/_pslinux.py -> build/lib.linux-x86_64-3.6/psutil
    copying psutil/_pssunos.py -> build/lib.linux-x86_64-3.6/psutil
    copying psutil/_pswindows.py -> build/lib.linux-x86_64-3.6/psutil
    copying psutil/_exceptions.py -> build/lib.linux-x86_64-3.6/psutil
    copying psutil/__init__.py -> build/lib.linux-x86_64-3.6/psutil
    copying psutil/_psposix.py -> build/lib.linux-x86_64-3.6/psutil
    copying psutil/_common.py -> build/lib.linux-x86_64-3.6/psutil
    copying psutil/_psosx.py -> build/lib.linux-x86_64-3.6/psutil
    copying psutil/_compat.py -> build/lib.linux-x86_64-3.6/psutil
    creating build/lib.linux-x86_64-3.6/psutil/tests
    copying psutil/tests/test_system.py -> build/lib.linux-x86_64-3.6/psutil/tests
    copying psutil/tests/test_bsd.py -> build/lib.linux-x86_64-3.6/psutil/tests
    copying psutil/tests/test_connections.py -> build/lib.linux-x86_64-3.6/psutil/tests
    copying psutil/tests/test_memory_leaks.py -> build/lib.linux-x86_64-3.6/psutil/tests
    copying psutil/tests/__main__.py -> build/lib.linux-x86_64-3.6/psutil/tests
    copying psutil/tests/test_windows.py -> build/lib.linux-x86_64-3.6/psutil/tests
    copying psutil/tests/test_osx.py -> build/lib.linux-x86_64-3.6/psutil/tests
    copying psutil/tests/test_contracts.py -> build/lib.linux-x86_64-3.6/psutil/tests
    copying psutil/tests/test_linux.py -> build/lib.linux-x86_64-3.6/psutil/tests
    copying psutil/tests/test_misc.py -> build/lib.linux-x86_64-3.6/psutil/tests
    copying psutil/tests/test_sunos.py -> build/lib.linux-x86_64-3.6/psutil/tests
    copying psutil/tests/__init__.py -> build/lib.linux-x86_64-3.6/psutil/tests
    copying psutil/tests/test_posix.py -> build/lib.linux-x86_64-3.6/psutil/tests
    copying psutil/tests/test_unicode.py -> build/lib.linux-x86_64-3.6/psutil/tests
    copying psutil/tests/test_aix.py -> build/lib.linux-x86_64-3.6/psutil/tests
    copying psutil/tests/test_process.py -> build/lib.linux-x86_64-3.6/psutil/tests
    running build_ext
    building 'psutil._psutil_linux' extension
    creating build/temp.linux-x86_64-3.6
    creating build/temp.linux-x86_64-3.6/psutil
    x86_64-linux-gnu-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fdebug-prefix-map=/build/python3.6-EKG1lX/python3.6-3.6.5=. -specs=/usr/share/dpkg/no-pie-compile.specs -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -DPSUTIL_POSIX=1 -DPSUTIL_VERSION=546 -DPSUTIL_LINUX=1 -I/usr/include/python3.6m -c psutil/_psutil_common.c -o build/temp.linux-x86_64-3.6/psutil/_psutil_common.o
    psutil/_psutil_common.c:9:10: fatal error: Python.h: No such file or directory
     #include <Python.h>
              ^~~~~~~~~~
    compilation terminated.
    error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
   
    ----------------------------------------
Command "/usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-l2yfnncb/psutil/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-kstst21x-record/install-record.txt --single-version-externally-managed --compile --user --prefix=" failed with error code 1 in /tmp/pip-build-l2yfnncb/psutil/

ممنون میشم راهنماییم کنید.

یا علی
عضو ارشد فدراسیون بیکاران ایران FBI